How do I use Bluetooth or Wi-Fi with MB4110 / MB4111 Power stations?

Scan the QR code located on the side with your phone camera.

This will take you to the App download page, choose the App suitable for your phone

Winergy (Google) Wpower (Apple)

Open the App and press Sign Up

Type your email address and press Get Code

Open your email, get the code and type it into the App under Your Verification Code

Type a password under Your New Password, and press Sign Up

The App will return to the login page. Enter your email and password

Press Login and press Agree to the terms. Allow any permissions it requests

Press + Add Device and turn on the power station

Press the large Power button on the power station to turn it on.

The station will shortly appear in the App and you can select it. 

The power station will not appear when scanning via the App

If your MB4110 or MB4111 will not scan in the App, you need to clear the Bluetooth pairing. 

If you have previously paired & then deleted the power station from the App, it will not be available to scan & pair again until you clear the Bluetooth / IOT  on the unit itself as shown below.

1. Power off the unit (Long press the power button if on, wait for OFF message to go away)
2. Press and hold the AC button, and then press and hold the Power button, keeping both pressed
3. Wait for the screen to light up all the display elements, and let go when it beeps
4. You can now scan it in the App.