Owning a 3D printer is a bit like owning a race car, except you are both the mechanic and the driver, which means you'll need to take responsibility for maintenance, and occasionally fixing things when they go wrong.
You'll also need to have a PC and an internet connection, be capable of Googling for solutions to common issues usually found in forums such as Reddit, know how to use screwdrivers, Allen keys, and spanners, and have the confidence to pull things apart for maintenance and repair.
Elegoo have an excellent collection of support resources to assist you in replacing parts yourself.
Most Jaycar stores can offer a guidance and insight into the repair and maintenance requirements for your printer. Stores are not able to run resin printers in-store, sorry.
Slicer software
Support Wiki for Mercury Plus V3
https://wiki.elegoo.com/en/washing/machine
Common replacement tutorials for Mercury Plus V3
- Why the machine is not on?
- Why the curing machine turntable is not turning?
- Why the curing station click to start and then machine restarts?
- How to resolve the strange noise/motor noise issue?
- There is noise and washing machine impeller does not rotate?
Tech support resources & tutorials for Mercury Plus V3
- Cleaning Bucket Turntable Replacement
- Motherboard Replacement
- Motor Replacement
- Switch Circuit Board Replacement
- UV Light Board Replacement
How to find spare parts for Mercury Plus V3
https://au.elegoo.com/collections/resin-3d-printers-accessories
Technical Support from the manufacturer
Visit this page: https://www.elegoo.com/pages/contact-us
Fill out the form with your details, date of purchase, and they will get back to you.
Comments
0 comments
Article is closed for comments.