Issue
Centauri Carbon printer TL4980 has ErrorCode : 103 The printhead didn't heat up as expected:
Cause
The hotend may not be heating as well as it should or its cable plugs may be loose.
Inspect the USB cable leading to the top of the print head - if it is damaged, it will need replacement.
If the cable is intact, it may not be seating correctly, and may go intermittent when heat-soaked.
Fixes
Power off and install a new hotend (Cat No. 001756), as this is easy to replace. If that does not solve the issue, the cable is likely needing replacement.
If your USB cable is damaged, please contact your seller for a replacement (Cat No. 001767).
https://wiki.elegoo.com/Centauri-carbon/how-to-replace-the-connection-cable-of-the-print-head
Reseating the cable mount, and trimming the plug may improve the fit of intact cables, as per the page below.
If this does not resolve your issue, please work through the Elegoo page below:
https://wiki.elegoo.com/Centauri-carbon/103-the-print-head-didn't-heat-up-as-expected
Comments
0 comments
Article is closed for comments.