Photon Mono 4 TL5250 - Anycubic 3D Printer support

Owning a 3D printer is a bit like owning a race car - you'll need to do some maintenance, and occasionally fix things when they go wrong.

Anycubic have an excellent collection of support resources to assist you in replacing parts yourself.

Most Jaycar stores can offer guidance and insight into the repair and maintenance requirements for your printer. Stores are unable to inspect or work on used resin printers in-store due to safety requirements, sorry. 

Note that some components such as FEP films are consumable, and are expected to be replaced by the owner when worn out. Refer to the Anycubic warranty page for component warranty periods.

Support Wiki for Photon Mono 4

There is a support wiki available here: https://wiki.anycubic.com/en/resin-3d-printer/photon-mono-4

User manuals for Photon Mono 4

• Manual
• Unboxing Videos
• Unboxing process
• Leveling Guide
• Packing process

Common replacement tutorials for Photon Mono 4

• Photon Mono 4 FAQ
• Photon Mono 4 USB not recognized
• Photon Mono 4 Abnormal pop-up troubleshooting
• Photon Mono 4 Z-axis limit switch not working properly guide
• Photon Mono 4 Maintenance suggestion
• Photon Mono 4 Printing effect is not-good
• Photon Mono 4 Z-axis screw cleaning guide
• Photon Mono 4 FEP film Replacement Guide
• Photon Mono 4 Motherboard Replacement Guide
• Photon Mono 4 UV Lamp Module Replacement Guide
• Photon Mono 4 UV Lamp Board Cooling Fan Replacement Guide
• Photon Mono 4 LCD Screen Replacement Guide
• Photon Mono 4 Control Panel Replacement Guide
• Photon Mono 4 Z-axis Motor Replacement Guide
• Photon Mono 4 Limit Switch Replacement Guide
•  
•  

How to find spare parts for Photon Mono 4

https://store.anycubic.com/collections/accessories-for-photon-mono-4

Technical Support from the manufacturer

Visit this page: https://anycubic.com/en/SupportCenter

You can also submit a support ticket here: https://anycubicsupport.zendesk.com/hc/en-001/requests/new